Preparation for the site: Before applying paint, dust, oil, and micro-objects should be cleaned up properly from the wall. For new walls, use sandpaper or stone, and for old walls, use a scrapper to clean up. The wall should be dried up properly before applying paint to cure it.
 
Step-1: Thin up to 1:1 by adding clean water with Salt Seal. After applying it on the wall it will take 1-2 hours to get the wall dried up. Salt Seal is applicable for both interior and exterior walls. Per litre, coverage is about 90 sqft - 100 sqft.
 
Step-2: For covering different flaws or imperfections, and ensuring smoothness, use Puttelite Wall Putty. It will take 3 - 4 hours to get the wall dried up.
 
Step-3: Use an extra 1 coat Salt Seal can be used after using wall putty if there is a chance of more salt damp.
 
Special Note: Salt Seal primer is essential, especially for coastal areas or if there is a chance of salt dampness. Stir the salt seal well before using. Use a clean brush and roller for proper application. Tightly close the lid after every uses so that air does not harm the paint. Clean all equipment with water immediately after use.