Widely used Marelite Marine paint is based on high quality raw materials .It is highly bright, smooth, and it is highly resistance to rust and adverse weather. Marelite Marine paint is specially used on metal work, especially useable for inside and outside of ship.
Preparation for the site: Before applying paint, use thinner to clean up oily and greasy matter from specific place properly. Then Use 120 emery paper, wire brush or grinder machine to remove old paint, rust and separated dust layer. Grit or sand blasting is very effective to clean for iron or steel surface.
Method of using primer: For iron or steel surface, use Marelite zinc chromate primer, Marelite zinc phosphate primer, Marelite anti Corrosive Red Oxide primer .Give 18 - 24 hours for dried up.
Method of using Top coat/Finish coat: Use Marelite Marine paint or Marelite boot topping paint or Marelite non-skid deck paint as per requirement of surface. Thin up to 10% - 15% by adding required thinner with 1 litre Marelite Marine paint. For a smoother finish, 2 coats of thinner mixed Marelite Marine paint can be applied. Then give 18-24 hours in each coat. Follow the given date sheet of company to know the application process of all mentioned products of Marelite.
Maintenance: Use clean brush, roller and spray for proper application. Clean brush, roller and all other equipments with thinner immediately after uses. Use mixed paint immediately. Again mix the paint during the time of applying 2 coats. Use gloves, eyeglass for safety.